Measurements and Useful Tips


The actual frame size is the glass inner size.

Picture frames are measured by the rebate in the back of the picture frame. If you were to turn the picture frame over to see the back where the glass and picture fits you'd measure from top to bottom for one measurement i.e. 10 inches and from left to right for other measurement i.e. 8 inches. See below image the orange line of the exact measurement.


Board thickness is 1400 microns.
Protection from daylight and sunlight.
We use the finest quality white core and conservation mountboard that offers a clean, crisp bevel cut.
Each board is lignin free, alkaline sized, acid free, PH neutral and is calcium carbonate buffered to enhance its useful lifespan by minimising the effect of atmosphere pollutants.


    We cut any size apertures smaller by 0.5" than the photo size so the photo can sit perfectly behind the mount otherwise it will fall through the photo opening

    Example - Your photo size 6 x 4" we cut the aperture size 5.5 x 3.5"


    For the frame size 20 x 8" (50.8 cm x 20.3 cm) and 12 x 10" (30.4 cm x 25.4 cm)
    We recommenced you use 'Command Hanging Strips' (not supplied) for flush fitting on the wall - Use one on each end (top and bottom, vertical position) it's safer than hook/nail and will look neater and straighter in any room.


    All our photos as shown in the images on Azana Photo Frames website are for illustration purposes. Due to differences in computer monitors, colours may differ slightly.