How to Measure a Frame
FRAME MEASUREMENT
The frame measurement refers to the glass inner size, not the overall outer size of the frame.
Picture frames are measured by the rebate at the back of the frame. When you turn the frame over, the rebate is the space where the glass and picture sit. You measure from top to bottom for one dimension (for example, 10 inches) and from left to right for the other (for example, 8 inches).
Example: the sample frame measures 20 × 8 inches (shown by the orange lines).

Understanding the aperture sizes helps you choose the right fit for your photos.
APERTURE PRECISION CUT
We cut every aperture 0.5 inch smaller than the photo size so the photo sits securely behind the mount. If the aperture is the same size as the photo, the photo would fall through the opening.
Example: For a 6 × 4 inch photo, the aperture is cut to 5.5 × 3.5 inch.
MOUNTBOARD MATERIAL
We use 1400‑micron mat board.
It’s a premium white‑core conservation mountboard that gives a clean, crisp bevel and strong protection against daylight and sunlight.
Each board is lignin‑free, alkaline‑sized, acid‑free, pH‑neutral, and buffered with calcium carbonate to extend its lifespan by reducing the impact of atmospheric pollutants.

HANGING
We recommend using Command Hanging Strips (not supplied) for a flush, clean fit on the wall. They cost more than hooks or nails, but they hold the frame far more securely and keep it looking neat and straight in any room. I use them for all frame sizes at home, large and small.
Alternatively, you can place the frame on a shelf and let it rest against the wall for a simple display.
PLEASE NOTE;
All photos shown on the Azana Photo Frames website are for illustration purposes only. Colours may vary slightly due to differences in computer monitor or smartphone displays.